DAKOTA ULTRASONICS CMX DL Operation Manual page 72

Dakota Ultrasonics
3) Press the ENTER key to enable the coating option, or ESC to cancel
changing the measure mode, and return to the main measurement screen.
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the TUNE menu is highlighted and displaying the submenu items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until MEASURE MODE is highlighted.
3) Press the LEFT and RIGHT arrow keys to scroll the modes.
4) When the correct MODE is being displayed, press the MEAS key to return
to the measurement screen and begin taking readings.
1.800.544.2843
Measure Mode (Tabbed Menus) – (PECT & CT)
Applied to Metals
www.calcert.com
15
10 20
5 25
0 30
Not Applied to Metals
70
sales@calcert.com