DAKOTA ULTRASONICS CMX DL Operation Manual page 5

B. Battery Icon – Indicates the amount of battery life the CMX
C. Velocity – The material velocity value the CMX
D. Feature Status Bar – Indicates the features currently enabled and in use in
E. Digital Material Thickness Value – Extra large font size for viewing ease.
F. Scan Bar – Another view of material thickness in a deflection style horizontal
G. Units – The current measurement units being used (English, Metric).
H. Digital Material Thickness Value – Smaller font size when the B-Scan
I. Coating Thickness Value – Displays the actual thickness of any coating
J. Minimum Material Thickness – Part of the Alarm feature. Displays the
K. Maximum Material Thickness – Part of the Alarm feature. Displays the
L. B-Scan Display – Cross section view of the material. Provides the user with
1.800.544.2843
DL
CMX
calibrated for. Displayed in both English or Metric units, depending on the
what units the gauge is set for.
the following order:
• Measurement Mode
• Differential Mode
• High Speed Scan Mode
• Alarm Mode
• Gain Setting
bar. This is a visual tool that would enable the user the ability to see thickness
changes during high speed scans from flaws and pits.
display view is enabled.
adhered to a metallic material surface (PECT Mode), or a coating adhered to a
non-metallic surface (CT Mode).
minimum thickness value found during a scan.
maximum thickness value found during a scan.
graphical view of the opposite/blind surface (i.e. inside pipe wall surface), to
give the user some idea of the condition, or integrity of the material being
tested.
www.calcert.com
15
10 20
5 25
0 30
High Performance Material & Coating Thickness Gauge
3
DL
has remaining.
DL
is currently using or
sales@calcert.com