Table of Contents
Advertisement
COATING 1PT: Performs a single point coating calibration. This option allows the
user to automatically calculate the velocity by measuring a known coating sample
thickness. Refer to page 77 for further info.
COATING 2PT: Performs a two-point coating calibration. This option allows the
user to automatically calculate the velocity by entering a second known coating
sample thickness. Refer to page 77 for further info.
COATING VEL: Function to calibrate the CMX
by entering a coating velocity. Refer to page 15 or page 71 for further info.
3.4 DISP (display) – Menu
VIEW: Selectable BSCAN (cross section), and DIGITS (large digits) views. Refer to
page 56 for further info.
B-START: Provides the user the ability to change the start position of the B-SCAN
view. Refer to page 60 for further info.
B-DEPTH: Provides the user the ability to change the overall depth of the viewable
measurement area. It functions a lot like a zoom on a camera. Refer to page 62 for
further info.
UNITS: Toggle between English or Metric units. The readout will change from
inches to millimeters.
BACKLIGHT: Selectable OFF, ON, AUTO, or INVERT backlight option.
CONTRAST: Adjustable display contrast for variable light conditions.
3.5 TUNE – Menu
MEASURE MODE: Toggles a variety of unique measurement modes for different
application requirements. Refer to page 32 for further info.
GAIN: A 5 position gain switch in 2 db increments from 40 to 50 dB. Increase for
better penetration or punch, and decrease to eliminate unwanted noise or better
resolution. Refer to page 64 for further info.
1.800.544.2843
DL
CMX
High Performance Material & Coating Thickness Gauge
25
www.calcert.com
15
10
20
5
25
0
30
DL
to a specific coating material type
sales@calcert.com
Advertisement
Table of Contents
