DAKOTA ULTRASONICS CMX DL Operation Manual page 73

9.3 Zero Coating
In order to account for very slight electronic differences in transducers of the same
type, frequency, and diameter, the CMX
feature. This enables the CMX
eliminating potential errors incurred from slight differences in the manufacturing
processes. The procedure is outlined below:
1) Press the MULTI MODE key once to activate the measurement mode
options.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until Coating Only (CT) mode is highlighted.
3) Press the ENTER key to select the measurement mode and return to the
measurement screen.
4) Apply a drop of couplant on the transducer and place the transducer in
steady contact with the probe zero disk (battery cover) and obtain a steady
reading.
Note: The coating measurement displayed will potentially be a value greater or
less than 0.
1.800.544.2843
DL
CMX High Performance Material & Coating Thickness Gauge
DL+
DL+
to obtain very accurate readings on coatings,
Performing a Coating Zero
71
www.calcert.com
15
10 20
5 25
0 30
has been equipped with a "zero coating"
sales@calcert.com