DAKOTA ULTRASONICS CMX DL Operation Manual page 110

Dakota Ultrasonics
11.7 Changing the active File - Open
The user may have transferred grid/seq templates from a PC to the CMX
grids/seq using the CMX
always displayed at the top of the Grid/Seq Box in measurement mode (refer to
photo below). It's not only important to recognize what file is currently active, but also
be able to change the active file at any time. The following procedures outline this
process:
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the DATA menu is highlighted and displaying the submenu items.
1.800.544.2843
DL
at an earlier time. The name of the currently active file is
Changing the Active File
Grid Log
108
www.calcert.com
15
10 20
5 25
0 30
DL
Sequential Log
sales@calcert.com
, or setup