Table of Contents
Advertisement
2)
Use the UP and DOWN arrow keys to scroll through the sub menu items
until VIEW is highlighted.
3)
Use the LEFT and RIGHT arrow keys to scroll the view options.
4)
Once the view is displayed, press the MEAS key to return to measurement
mode.
DIGITS: Displays the digital thickness value using a large font size. This view is
useful when the CMX
BSCAN: The Time Based B-Scan provides the user with a cross sectional view of
the material being tested. This mode is useful when there is concern regarding the
profile of the blind surface. This can also be a useful view when scanning for pits and
flaws.
Once the view has been selected according to the application requirements, the B-
START and B-DEPTH of the screen will potentially need to be adjusted if the view
has been set to BSCAN. Use the following steps to adjust these as follows:
Note: The B-Start and B-Depth are also used to adjust the parameters of Scan
Bar.
1.800.544.2843
DL
CMX
High Performance Material & Coating Thickness Gauge
DL
is being used as a basic thickness gauge.
Adjusting B-START & B-DEPTH
19
www.calcert.com
15
10
20
5
25
0
30
sales@calcert.com
Advertisement
Table of Contents
