DAKOTA ULTRASONICS CMX DL Operation Manual page 10

Dakota Ultrasonics
1) Be sure all couplant has been removed from the face of the transducer.
2) Press the OK key to perform the automatic probe zero, or ESC key to
cancel the zero operation.
3) The screens illustrated above will be briefly displayed followed by the main
measurement screen. The CMX
1.800.544.2843
Performing an Auto Probe Zero (Off Block)
Coating Probe Identified
Coating Probe Identified
www.calcert.com
15
10 20
5 25
0 30
Coating Probe Not Identified
Coating Probe Not Identified
DL
is ready to be calibrated.
8
sales@calcert.com