DAKOTA ULTRASONICS CMX DL Operation Manual page 43

3) Press the UP and DOWN arrow keys to toggle the coating option on/off.
4) Wipe all couplant from the transducer face and proceed to the Probe Zero
section that follows .
In this second example the transducer was not identified and will force the user to
select the transducer type from a predefined list of transducers:
5) Press the OK or ESC keys to display the factory list of transducer types (by
diameter and frequency).
1.800.544.2843
DL
CMX High Performance Material & Coating Thickness Gauge
Selecting the Transducer Type
41
www.calcert.com
15
10 20
5 25
0 30
sales@calcert.com