Table of Contents
Advertisement
CHAPTER TEN
ADDITIONAL FEATURES OF THE CMX
10.1 High Speed Scan
The High Speed Scan feature of the CMX
maximum of 140Hz with a high speed screen refresh rate of 25 times a second. This
feature enables a user to make scanned passes over an arbitrary length of the test
material, while still maintaining a reasonable representation of thickness over the
scanned area or region. This feature can be used in conjunction with High and Low
alarm limits features to dynamically keep track of both values. The feature is typically
used to provide a better representation of the area scanned, by taking more readings
at a faster rate repetition rate.
The procedure to use the SCAN MODE feature is outlined below:
1)
Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the UTIL menu is highlighted and displaying the submenu items.
2)
Use the UP and DOWN arrow keys to scroll through the sub menu items
until SCAN MODE is highlighted.
3)
Use the LEFT and RIGHT arrow keys to toggle the SCAN MODE on/off.
1.800.544.2843
DL
increases the overall repetition rate to a
Using the Scan Mode
82
www.calcert.com
15
10
20
5
25
0
30
DL
sales@calcert.com
Advertisement
Table of Contents
