Honeywell C7015A Manuals

Table of Contents

• 1

  Application and Features

• 2

  Specifications

• 2

  Tables

  • 2

    Ordering Information
  • 2

    Table I -Models Available

  • 3

    Figures

  • 3

    Dimension Drawings
    • 3

      Fig. 1 -Mounting Dimensions of C7015A Infrared Flame Detector and Accessories, in In. [MM]

• 4

  Installation

  • 4

    Basic Requirements
    • 5

      Fig. 2 -Methods of Reducing C7015A Infrared Flame Detector Field-Of-View
    • 5

      Table 2 -Diameter of Area Sighted Through Various Lengths of 3/4 Inch Pipe Without Orifice, in in
    • 6

      Fig. 3 -Using Orifice Plate to Restrict Detector Field-Of-View to Intersection of Pilot and Main Flame, or to Small Area of Hot Refractory
    • 6

      Table 4 -Diameter of Area Sighted Through Orifice, in in
    • 6

      Table 5-Diameter of Area Sighted Through Orifice, in MM
    • 7

      Fig. 4 -C7015A Infrared Flame Detector Aimed at Side Wall of Combustion Chamber
    • 7

      Fig. 5 -C7015A Infrared Flame Detector Aimed at a Point Above Refractory
    • 7

      Fig. 6 -C7015A Infrared Flame Detector Aimed at Floor of Combustion Chamber

• 4

  Operation

• 8

  Installing the Sight Pipe

  • 8

    Installing Accessories
  • 8

    Mounting the Detector
    • 8

      Fig. 7-Forced Air Cooling
  • 9

    Wiring
    • 9

      Fig. 8 -Installing Lead Sulfide Photocell

• 10

  Adjustments and Checkout

  • 10

    Fig. 11 -Typical Wiring of C7015A to Distant Wiring Subbase or Terminal Strip
  • 11

    Table 6-Flame Signal
  • 11

    Fig. 12 -Measuring Microamp Ilame Signal
  • 11

    Fig. 13 -Measuring BCS 7700 Flame Safeguard Control Flame Signal Voltage
  • 11

    Fig. 14 -Measuring 7800 SERIES Flame Safeguard Control Rame Signal Voltage

• 13

  Troubleshooting

  • 13

    Fig. 10 -Typical Wiring of C7015A to Nearby Wiring Subbase or Terminal Strip

• 14

  Service

  • 14

    Periodic Maintenance