Table of Contents
Advertisement
System Check
After completing the fixture installation, do the following checks.
1
Figure 41 Pressure check
2
Figure 42 Sensor check for press down model
Medalist i1000 Installation Guide
Check the compressed air pressure, which should be between
100–110 psi.
Check that all sensors are functional by activating them.
a
Log on to the Medalist i1000 software.
From the Diagnostics menu, select I/O Cards. Click Read All.
b
Upon activation of the sensor switches, the status of the sensors should
change from OFF to ON or vice versa.
check for the press down model.)
(Figure 42
shows a sample sensor
31
Advertisement
Table of Contents
