Front Panel Access - Agilent Technologies Medalist i1000 Installation Manual

Front Panel Access

The front panel of the Medalist i1000 provides access to the power
switches and cards in the testhead. The front panel can also be removed
when servicing is required.
•
•
•
Opening the Front Panel
1
Figure 1 Handle on front panel
2
Figure 2 Unlock front panel
Medalist i1000 Installation Guide
Opening the Front Panel
Removing the Front Panel
Replacing the Front Panel
The front panel has two recessed handles, one on each side of the
panel. Push the bottom of the handle on the front panel as shown in
Figure 1 and rotate the handle out from its recessed position. Do the
same on the other side of the front panel.
Latches on the inside of the front panel secures the panel in place. You
have to open the side panel to reach and unfasten the latch
Do the same on the other side of the test station.
Location of latch
(Figure 2).
3