Table of Contents
Advertisement
Installing the Fixture on the Vacuum Model (U9402A)
On the vacuum model, the fixture can be installed and engaged
automatically or manually.
•
•
See also
Automatic Mode
1
Figure 30 Vacuum fixture
2
Figure 31 Control box
Releasing the Fixture
To disengage and release the fixture, press the AUTO RELEASE button (b).
24
Automatic Mode
Manual Mode
"Parts of the Vacuum Fixture (U9402A)"
Place the fixture between the guide rails and push it over the tester
interface.
Press the AUTO LINK button (a) to automatically lock and engage the
fixture.
(a)
(b)
on page 28.
Medalist i1000 Installation Guide
Advertisement
Table of Contents
