3
Figure 10 Strip power cord and insert in connector
4
WA R N I N G
Figure 11 Solder wires to terminals
Medalist i1000 Installation Guide
Strip the insulation of the power cord to expose the wires. Insert the
power cord through the metal casing of the power connector
(Figure
10).
Solder the wires to the correct terminals on the connector insert. The
terminals are numbered as shown in
Ensure the wires are connected to the correct terminals as shown in
Figure
11. Otherwise the system could be damaged.
Figure
11.
1
Earth
3
Neutral
2
Live
9