Connection And Control Elements; Motor Monitoring X1C (Temperature, Brake); Table 2 Overview Connection And Control Elements - KEB COMBIVERT S6 Instructions For Use Manual

3 | Product description
3.4 Connection and control elements
3.5 Motor monitoring X1C (temperature, brake)
14
PE
X2B
FS ST
VCC
X3B
PE
Table 2: Overview connection and control elements
Terminal strip X1C is a 6-pole, pluggable terminal strip with spring-cage connection. It
contains:
• 1 output for control of 24V motor brakes
X1C Temperature monitoring, brake
control/ monitoring
X1Z Strain relief
X2A Control terminal block for digial in-
puts/ outputs; 24V supply; relay
output;analog inputs and outputs;
CAN bus
X1Z X2B Safety module (depending on vari-
ant)
X3A Encoder interface channel A
X3B Encoder interface channel B
X4A Diagnostic interface with
X2A
RS232/485 interface according to
DIN66019II protocol; operator slot
X4B Realtime-Ethernetmodule
(depending on variant)
X4C Realtime Ethernetmodule
(depending on variant)
S1 Realtime Ethernetmodule (depend-
X4A
ing on variant)
rotary coding switch 1 (low byte)
DEV ST
S2 Realtime Ethernet module (de-
OPT
pending on variant)
rotary coding switch 2 (high byte)
NET ST
FS ST LED safety status
X4B
VCC LED voltage supply (24V)
NET ST LED network/ fieldbus status
X4C
DEV ST LED inverter/ device status
S1 OPT optional
S2
X3A
ma_dr_s6-cu-a-inst-20109645_en
KEB Automation KG
X1C