Symbols And Markers; Laws And Guidelines; Warranty And Liability; Support - KEB COMBIVERT S6 Instructions For Use Manual

1 | Introduction
1.1.3 Symbols and markers
1.2 Laws and guidelines
1.3 Warranty and liability
1.4 Support
1.5 Copyright
8
Notes on conformity for use in the North American or Canadian mar-
ket.
ü Condition
a) Action step
ð Result or intermediate result
Hyperlink
<Steuercode>
Lexicon entry
KEB Automation KG confirms with the CE mark and the EU declaration of conform-
ity, that our device complies with the essential safety requirements.
The EU declaration of conformity can be downloaded on demand via our website.
The warranty and liability on design, material or workmanship for the acquired
device is given in the general conditions of sale.
Here you will find our general sales conditions.
https://www.keb.co.uk/terms-and-conditions
Further agreements or specifications require a written confirmation.
Through multiple applications not every imaginable case has been taken into ac-
count. If you require further information or if problems occur which are not treated
detailed in the documentation, you can request the necessary information via the
local KEB Automation KG agency.
The use of our units in the target products is beyond of our control and
therefore exclusively the responsibility of the customer.
The information contained in the technical documentation, as well as any user-spe-
cific advice in spoken and written and through tests, are made to best of our know-
ledge and information about the intended use. However, they are considered for in-
formation only without responsibility and changes are expressly reserved, in partic-
ular due to technical changes. This also applies to any violation of industrial prop-
erty rights of a third-party.
Selection of our units in view of their suitability for the intended use must be done
generally by the user.
Tests can only be carried out within the scope of the intended end use of the
product (Application) by the Customer. They must be repeated, even if only
parts of hardware, software or the unit adjustment are modified.
The customer may use the instructions for use as well as further documents or
parts from it for internal purposes. Copyrights are with KEB Automation KG and re-
main valid in its entirety.
KEB Automation KG
ma_dr_s6-cu-a-inst-20109645_en