Analog Output; Voltage Supply - KEB COMBIVERT S6 Instructions For Use Manual

4 | Connection of the control
Connection
4.2.5 Analog output
Specification
Connection
4.2.6 Voltage supply
4.2.6.1 Voltage input
4.2.6.1.1 Determination of the current consumption
22
Connection of the analog absolute input AN3
DC 0,2...10 V
Number
Name
Terminals
Classification
Voltage output
Minimum load impedance
Notes
Connection of the analog output ANOUT
22
21
The control board is supplied
• externally by a central 24V supply.
To select a suitable voltage source, the maximum current consumption must al-
ways be determined.
The input P24Vin (X2A.28) supplies following components:
• Control (control board with safety module)
• Driver/power unit
• Brake
• Encoder
1 9
+
1
ANOUT
X2A.22 analog output
X2A.21 reference potential
DIN EN 61131-2
DC 0.0...10 V (corresponds to 0...100 %
output value)
1 kΩ
In the range up to 0.1 V the output value
is not linear to the output voltage.
U =0,0...10 V
DC
Z =1 kΩ
min
ma_dr_s6-cu-a-inst-20109645_en
KEB Automation KG