Usb-Serial Converter; Connection Of The Rs485 Interface - KEB COMBIVERT S6 Instructions For Use Manual

6.3 USB-serial converter
6.4 Connection of the RS485 interface
ma_dr_s6-cu-a-inst-20109645_en
The USB serial converter (material number 0058060-0040) is used to connect
drive controllers, operators or IPC controllers with
terface to the USB port of personal computers. The USB-serial converter is internal
electrically isolated.
The RS485 interface supports half-duplex and duplex operation. Wiring examples
can be found in the following link:
Wiring examples can be found under the following link:
https://www.keb.de/fileadmin/media/Techinfo/dr/tn/
ti_dr_tn-rs485-connection-00002_en.pdf
Diagnosis/visualisation X4A | 6
DIN 66019 interface or HSP5 in-
27