Vcc - Led; Net St - Led; Dev St - Led; Opt - Led - KEB COMBIVERT S6 Instructions For Use Manual

3 | Product description
3.11.2 VCC - LED
3.11.3 NET ST - LED
3.11.4 DEV ST - LED
3.11.5 OPT - LED
16
LEDs Status
VCC FPGA booted
NET ST
DEV ST
OPT
VCC
ready for operation
NET ST
DEV ST
OPT
Table 3: LEDs at power on
VCC LED colour Description
off - Power supply of the control card switched off.
on green Control is supplied with 24 V.
Table 4: Function VCC LED
NET ST LED colour Description
off - Device off or booting.
on yellow During switching on, if FPGA is booted.
Blink various depending on fieldbus => fieldbus interfaces.
code
Table 5: Function NET ST - LED
DEV ST LED colour Description
off - Device off or booting.
on red Error
on yellow No error, DC link not loaded.
on green no error, ready for operation.
flashing green No error, is used for identification of the unit (fb32).
Table 6: Function DEV ST - LED
OPT LED colour Description
- - reserved for options.
Table 7: Function OPT - LED
Note
FPGA has been booted error-free (approx. 6 s)
Device is ready for operation and the LEDs start
with their normal function (approx. 3 s)
ma_dr_s6-cu-a-inst-20109645_en
KEB Automation KG