Installation And Mounting; Electrical Connection; Start-Up And Operation - KEB COMBINORM B Instructions For Use Manual

BASIc SAfETY INSTrUcTIONS

1.3 Installation and mounting

NOTICE
Consider the following installation measures to prevent faults
► Do not operate the brake in an explosive environment.
► Provide measures against freezing or ice formation on the friction surfaces.
► Take appropriate measures against high air humidity, aggressive vapours/liquids or

1.4 Electrical connection

DANGEr

1.5 Start-up and operation

The operation must not be started until it is determined that the installation complies with
the machine directive; Account is to be taken of
cAUTION
12
Squeezing and pinching of fingers by self-rotation.
► Before installation, make sure that the drive is load-free.
► Secure drive against rotation.
similar that lead to corrosion and 'rusting' of the pole surfaces.
Electrical voltage at brake and motor !
Danger to life due to electric shock !
► Any work on the electrical power supply may only be carried out by
a qualified electrician.
► When carrying out any work on the coupling, switch off the supply
voltage to the motor and secure it against switching on.
► Never bridge upstream protective devices, not even for test purpos-
es.
► Standard-compliant testing of the protective conductor connection to
all touchable metal parts.
Pay attention to friction work (speed and the frequency of opera-
tion) !
Loss or drop of the braking torque !
► Exceeding the technical specifications may result in thermal over-
load at the braking surface or magnet. This may lead to failure of
the brake.
EN 60204-1.