Table of Contents
Advertisement
bASIc SAfETY INSTrUcTIONS
1.3 Installation and mounting
NOTICE
Consider the following installation measures to prevent faults
► Do not operate the brake in an explosive environment.
► Measures against freezing and/or formation of ice on the friction surfaces.
► Take suitable measures against high humidity, aggressive vapors/liquids or similar
1.4 Electrical connection
DANGEr
Squeezing and pinching of fingers by self-rotation.
► Before installation, make sure that the drive is load-free.
► Secure drive against rotation.
that lead to corrosion and 'sticking' of the surface.
Electrical voltage at brake and motor!
Danger to life due to electric shock!
► Only an electrician may work on the electrical power supply.
► When carrying out any work on the brake, switch off the supply volt-
age and secure it against switching on.
► Never bridge upstream protective devices (also not for test purpos-
es).
► Standardised inspection of the protective earth conductor connec-
tion to all exposed metal parts.
11
Advertisement
Table of Contents
