To View The Option Information And The Option Installation - Rigol MSO5072 User Manual

Chapter 1 Quick Start
options to get the corresponding help information.
Method 3:
Enable the touch screen and tap the desired help option to get the corresponding
help information.
Tip
Help information for other keys and buttons:
⚫
Power key
➢
Menu off key: displays or hides menus. By default, menus are
➢
displayed. If menus are hidden, pressing this key can display the
menus again.
Back key: returns to the previous menu or the last set function menu.
➢
Multifunction knob
➢
knob to adjust the brightness of waveform display. In menu-operation
mode, for the menu item that has multiple parameters under it, when
you press the menu softkey, rotate the knob to select the parameter
item, then press down the knob to select it (sometimes, the specified
parameter item can be selected by rotating the knob).
It can also be used to modify parameters, input a filename, etc.
If the menu item is grayed out, you cannot press the corresponding
⚫
front-panel menu key to obtain the help information. What you can do is
only to follow the above Method 2 or 3 to get the help information.
To View the Option Information and the Option
Installation
MSO5000 series oscilloscope provides multiple options to fulfill your measurement
requirements. If you need any of these options, order them according to the Order
No. available in "Appendix A: Accessories and Options", and then install the
options according to this section. Besides, you can also view the options currently
installed on the oscilloscope or activate the newly purchased option.
1. View the installed option
The instrument is installed with the trial versions of the options before leaving
factory. When you power on the instrument for the first time, the trial time is
about 2,160 minutes. If your instrument has currently installed the option,
perform the following operations to view the name of the installed option and
other detailed information about the option from the option list.
(1) Press Utility → System → Help, and then the "Help" menu is displayed
on the screen. You can also use the touch screen function, tap the function
navigation icon
MSO5000 User Guide
: powers on/off the instrument.
: In non-menu-operation mode, rotate this
at the lower-left corner of the touch screen to enable
RIGOL
1-29