Manual Mode; Starting A Centrifugation Run; Interrupting A Centrifugation Run; Interrupting A Deceleration Process - Sigma 4-5KRL Manual

Refrigerated Centrifuge for Robot Use Sigma 4-5KRL
Refrigerated Centrifuge for Robot Use Sigma 4-5KRL IVD
6 Using the centrifuge
→
6.3.2

Manual mode

→
6.3.2.1

Starting a centrifugation run

→
6.3.2.2

Interrupting a centrifugation run

→
6.3.2.3

Interrupting a deceleration process

→
6.3.2.4

Selection, display, and modification of data

38 / 113
The centrifuge is ready for operation when the start key is illuminated.
•
Press the start key in order to start a centrifugation run.
•
Press the stop key in order to interrupt a centrifugation run. The
centrifugation run will be terminated prematurely.
Quick stop
•
Press the stop key for more than two seconds.
The centrifuge decelerates with the maximum deceleration curve.
After a quick stop, the centrifuge lid must be opened before a new
centrifugation run can be started.
A quick stop can also be triggered during a normal deceleration, e.g. in
order to speed up the deceleration.
When a quick stop is triggered, "fast" will be displayed in the lower right-
hand corner of the display.
•
Press the start key during a deceleration process in order to interrupt it
and to restart the centrifuge.
•
Turn the function knob in order to select a field. The selected field will
be preceded by the indication "set", "run", or "save".
•
Press the function knob. The indication ("set", "run", or "save") flashes
and the modification mode is active.
•
Turn the function knob in order to modify the set value of the selected
field.
•
Press the function knob again to confirm the input and to quit the
modification mode
•
The process will be interrupted if the stop key is pressed or after 60
seconds without any further input.
Version 11/2017, Rev. 1.7.1 of 08/12/2022 • sb
Translation of the original operating manual,