11 Appendix; Suitable Accessories; 11.1.1 Rotor Radii - Sigma 4-5KRL Manual

→

11 Appendix

11.1

Suitable accessories

DANGER

11.1.1 Rotor radii

Version 11/2017, Rev. 1.7.1 of 08/12/2022 • sb
Translation of the original operating manual,
For use in a robot-controlled centrifuge, special equipment is required.
Please contact our sales department:
SIGMA Laborzentrifugen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Tel. +49 (0) 55 22 / 50 07-82 13
Fax +49 (0) 55 22 / 50 07 92 13
E-mail: info@sigma-zentrifugen.de
Rotors and accessories of the standard-centrifuge 4-5L must not be used
in a robot-controlled centrifuge without consultation with the
manufacturer!
The information in the accessories table concerning the radius refers to the
values of the respective rotor as shown below. The radius calculation is
described in chapter 2.2.2.1 - "Speed, radius, and relative centrifugal
force".
Fig. 33: Minimum and maximum radius of a swing-out rotor
Refrigerated Centrifuge for Robot Use Sigma 4-5KRL
Refrigerated Centrifuge for Robot Use Sigma 4-5KRL IVD
11 Appendix
67 / 113