Saving A Program; Loading A Program - Sigma 4-5KRL Manual

→
→
6.3.3.1

Saving a program

NOTE
NOTE
6.3.3.2

Loading a program

Version 11/2017, Rev. 1.7.1 of 08/12/2022 • sb
Translation of the original operating manual,
This function is only available if the centrifuge is at a standstill.
•
Enter the parameters that are to be included in the program.
•
Select the menu item "save Prog" and confirm the selection. The
indication "save" flashes in the activated status.
•
Select a random storage location from the program selection list. Free
storage locations are indicated by a flashing display. Any storage
locations that are already occupied will be overwritten during the saving
process.
•
Save the program in the desired location.
The program is now saved.
The functions "Auto Open", "Buzzer", "ProgLock", and "Cycles" cannot be
entered as part of a program.
Fig. 26: Saving a program
•
Select the menu item "run Prog" and confirm the selection. The
indication "run" flashes in the activated status.
•
Select the desired program and confirm the selection by pressing the
function knob.
The program is now loaded.
Fig. 27: Loading a program
Refrigerated Centrifuge for Robot Use Sigma 4-5KRL
Refrigerated Centrifuge for Robot Use Sigma 4-5KRL IVD
6 Using the centrifuge
47 / 113