Format Not Allowed - Northern Telecom DMS-100 Series Maintenance Manual

Procedure 4-23
Disk condition and disk file error messages - procedures
Procedure 4-24
Disk condition and disk file error messages - procedures
1

FORMAT NOT ALLOWED

2 Alarm Level:
N/A
3 Customer-Selected
Alarm Level
c.Replace MEM #1.
d.Replace CPU.
CAUTION
Improper performance of this procedure may cause data loss.
Make sure the operational disk drive is in DISK ONLY mode
before entering commands.
e.Call for technical assistance.
cause: printed in response to the DISK FORMAT
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
(continued)
DPP Recovery and Routine Maintenance Guide BCS35 and up
(continued)
i. See Printed Circuit Assembly Replacement in
297-1001-536: DPP Card Replacement Guide .
(If successful, procedure complete.)
Ii. If the problem is not cleared after PCA
replacement and restart, go to step c. Return the
original PCA to its position before proceeding.
i. For any other response, see the procedure for that
message and perform the activities listed.
ii. If successful, procedure complete. (If
unsuccessful, go to step e.)
End
command when the drive selected is already
1
on-line.
Type: N/A
Type:
Disk drive procedures 4-53
Level: N/A
Level: