Northern Telecom DMS-100 Series Maintenance Manual page 196

6-6 Automatic message accounting (AMA) messages
Procedure 6-4
AMA messages - procedures
4 Other Alarm Indications
5 System Recovery Action
6 Craftsperson Activity
Procedure 6-5
AMA messages - procedures
1 (log message)
NO BLOCK LAST HOUR
2 Alarm Level:
No processor switch
3 Customer-Selected
Alarm Level
4 Other Alarm Indications
5 System Recovery Action
297-1001-537 Standard 01.02 December 1993
Default:
Status Panel:
Customer-Selected
Status Panel:
The invalid records are stored on disk (exception file).
a. Analyze the invalid call record printout to
determine the discrepancy.
b. Call for technical assistance; the problem is in the
DMS-100. Perform steps to make sure no
unformatted call records are being sent to the
DPP.
End
cause: output on the boundary if, for the past boundary
no data blocks were received from the DMS-100
and the boundary is between the limits specified
by the AMAHRS site data parameters.
Reason Code = 28
Corresponds to ERRMAP entry:
System Default:
Type: Minor
Type:
Default:
Status Panel: Minor
Customer-Selected
Status Panel:
Alarm, no processor switch.
(continued)
Audible:
Audible:
Level: 0
Level:
Audible: Minor
Audible: