Northern Telecom DMS-100 Series Maintenance Manual page 102

4-68 Disk drive procedures
Procedure 4-33
Disk condition and disk file error messages - procedures
1 (log message)
DISK: TIME OUT
2 Alarm Level:
N/A
3 Customer-Selected
Alarm Level
4 Other Alarm Indications
5 System Recovery Action
6 Craftsperson Activity
Procedure 4-34
Disk condition and disk file error messages - procedures
1
WRITE TO DISK FAILED
297-1001-537 Standard 01.02 December 1993
cause: output as part of an error message when a disk
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Default:
Status Panel:
Customer-Selected
Status Panel:
None; task is terminated. Retry the disk command. If
the TIME OUT message repeats, go to step a.
a.Switch processors.
CAUTION
This action may cause data loss.
b.Call for technical assistance.
cause: a failure occurred when trying to write a block to
(continued)
command is not successfully executed within an
allocated time period.
Type: N/A
Type:
i. See Switch and Status Panel Operation.
ii. Retry the task.
iii. If the message does not repeat, procedure
complete. (If unsuccessful, go to step b.)
End
disk during a download session.
Level: N/A
Level:
Audible:
Audible: