Northern Telecom DMS-100 Series Maintenance Manual page 106

4-72 Disk drive procedures
Procedure 4-36
Disk condition and disk file error messages - procedures
Step Action
1
BOOTCP FILE yyyyyy
ERROR: ee
(w/56K polling)
= 00 = indicates file is closed
= 02 = active file table full
= 04 = file not closed
= 06 = file expired
= 08 = QIO error
= 10 = channel busy
= 12 = file not open for reading
= 14 = illegal file ID
= 16 = buffer overflow
= 18 = empty file is closed
2 Alarm Level:
Major
3 Customer-Selected
Alarm Level
4 Other Alarm Indications
5 System Recovery Action
297-1001-537 Standard 01.02 December 1993
Response
where: yyyyyy = Operation that returned the error
= CREATE
= READ
= REQBUF
ee = Operation Error Code
= 01 = directory full
= 03 = no such file
= 05 = file not open
= 07 = error writing last block
= 09 = file write protected
= 11 = end of file
= 13 = hardware error
= 15 = illegal buffer ID
= 17 = no more room on disk
= 19 = illegal file name
cause: an error occurred accessing the 56K Interface
boot list file during a 56K Interface download.
Reason Code = N/A
Corresponds to ERRMAP entry: CP FAULT
System Default:
Type: Major
Type:
Default:
Status Panel: Major
Customer-Selected
Status Panel:
System attempts a 56K Interface restart. If the 56K
interface cannot successfully complete a restart, the
alarm is upgraded to CP NOT AVAILABLE.
(continued)
= OPEN = WRITE
= CLOSE = SAVE
= DELETE = DIRTRY
Level: 1
Level:
Audible: Major
Audible: