4-42 Disk drive procedures
Procedure 4-19
Disk condition and disk file error messages - procedures
297-1001-537 Standard 01.02 December 1993
(continued)
Check to see if the problem message repeats.
Enter:
(at the terminal)
>DISK VS (cr)
Proper response =
D01D6I-00:3/10/89
this is the active disk ( firmware
version for any BCS using 380
Mbyte disks w/o 56K polling; verify
that there have been no version
updates since the original DPP
installation. If there have been,
substitute the new version number
in the proper response.
Need help?
Do you have a question about the DMS-100 Series and is the answer not in the manual?
Questions and answers