Northern Telecom DMS-100 Series Maintenance Manual page 107

Procedure 4-36
Disk condition and disk file error messages - procedures
Step Action
6 Craftsperson Activity
Response
a.List the BOOTCP boot list file.
b.The 56K Interface boot list file BOOTCP probably
needs to be recreated; create the boot file.
Enter:
>CP BOOT ADD (cr)
i. Respond to the system FILE prompt with the file
name. (Consult the office records for correct
name for the file.)
ii. Respond to the system VER prompt with the file
version number to append. (Check the office
records for the correct version number for the
file.)
iii. When finished entering all of the FILEs and
VERSIONs in the boot list, go to step c.
c.If the message repeats after completing step a and
reattempting step b, call for technical assistance.
End
DPP Recovery and Routine Maintenance Guide BCS35 and up
Disk drive procedures 4-73
(continued)
(at the terminal)