Northern Telecom DMS-100 Series Maintenance Manual page 208

6-18 Automatic message accounting (AMA) messages
Procedure 6-12
Recover AMA data from DIRP - DIRP block number not known
Step Description
Structure Code = 00700C
Call Code = 043C
ORIG NPA = 043C
ORIG Number = 820780C
TERM NPA = 00802C (note the zeros)
TERM Number = 8385792C
Connect Time = 0000152C
C = end of field
Break down a record from the other data
block in the same manner.
3 In this step, locate the Parallel Volume that
was recording for the time frame to be
recovered. If it is known which Parallel
Volume was active, skip this step.
At the MAP, enter:
>MAPCI;MTC;IOD;LISTDEV DDU
For each DDU, enter the following:
>IOC#;CARD#;ALLOC
At the MAP, enter:
>DSKUT
>LISTVOL <parallel volume name> ALL
>SHOWFL <file name, from listvol>
If it is determined that the Parallel Volume
that is needed to recover data from is the
current active device, the volume must be
CLOSED and removed from Table
DIRPSSYS field PARVOL (for BCS32 and
above, this table is called DIRPPOOL).
Reference NTP 297-1001-312 for this
procedure.
297-1001-537 Standard 01.02 December 1993
Notes
Note the IOC and CARD number of each
DDU
# = the numbers noted above
Note the parallel volume names; example
D000AMAP.
(continued)
(continued)