Northern Telecom DMS-100 Series Maintenance Manual page 151

Procedure 4-51
Disk drive hardware error messages - procedures
Procedure 4-52
Disk drive hardware error messages - procedures
1
DISK: MULTIPLE REAS-
SIGN CONDITION
(w/56K polling)
2 Alarm Level:
N/A
3 Customer-Selected
Alarm Level
4 Other Alarm Indications
(continued)
ii) If the problem is not cleared after PCA
replacement and restart, go to step e. Return
the original PCA to its position before
proceeding.
e. Replace the suspect disk drive.
i) See Disk Drive Procedures, Replacing Disk
Drive.
ii) Repeat steps a and b. (If unsuccessful, go to
step f.)
f. Call for technical assistance.
End
cause: this message follows a DISK: COMMAND
ERROR message. An additional bad sector has
been located on the disk. Relocation cannot be
scheduled; data in that sector is lost.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type: N/A
Type:
Default:
Status Panel:
Customer-Selected
Status Panel:
(continued)
DPP Recovery and Routine Maintenance Guide BCS35 and up
Disk drive procedures 4-117
Level: N/A
Level:
Audible:
Audible: