Northern Telecom DMS-100 Series Maintenance Manual page 152

4-118 Disk drive procedures
Procedure 4-52
Disk drive hardware error messages - procedures
5 System Recovery Action
6 Craftsperson Activity
Procedure 4-53
Disk drive hardware error messages - procedures
1
DISK: REASSIGN DATA
NOT RECOVERED
(w/56K polling)
2 Alarm Level:
N/A
3 Customer-Selected
Alarm Level
4 Other Alarm Indications
5 System Recovery Action
6 Craftsperson Activity
297-1001-537 Standard 01.02 December 1993
(continued)
None
a. See the Craftsperson Activities section for the
DISK: COMMAND ERROR message.
b. If those procedures do not clear the problem, call
for technical assistance.
End
cause: this message follows a DISK: COMMAND
ERROR message. The bad sector relocation has
failed; data for this sector is lost.
Reason Code = N/A
Corresponds to ERRMAP entry: N/A
System Default:
Type: N/A
Type:
Default:
Status Panel: N/A
Customer-Selected
Status Panel:
None
a. See the Craftsperson Activities section for the
DISK: COMMAND ERROR message.
b. If those procedures do not clear the problem, call
for technical assistance.
Level: N/A
Level:
Audible: N/A
Audible: