Northern Telecom DMS-100 Series Maintenance Manual page 109

Procedure 4-37
Disk condition and disk file error messages - procedures
6 Craftsperson Activity
Procedure 4-38
Disk condition and disk file error messages - procedures
1
xxxxxx FILE yyyyyy
ERROR: ee
(w/o 56K polling)
= AMACRD = AMA Call Record File
= BOOTFL = DPP System Boot File
= EXCCRD = Exception Record File
= LOGCRD = LOG Record File
= MAINF = Information File
= TDYSTS = Today's Statistics File
a.List the BOOTCP boot list file.
b.The SCSI Interface boot list file BOOTCP probably
needs to be recreated; create the system boot file.
Enter:
>CP BOOT ADD file_name file_version (cr)
i. Respond to the system FILE prompt with the file
name. Consult the office records for correct
name for the file_name and file_version.
ii. When finished entering all of the FILEs and
VERSIONs in the boot list, go to step c.
c.If the message repeats after completing step a and
reattempt at step b, call for technical assistance.
End
where: xxxxxx = File Name
= AMAIDX = AMA Index File
= DPPxxx = DPP System Program File
= EXCIDX = Exception Index File
= LOGIDX = LOG Index File
= SITDAT = Site Data File
= YDYSTS = Yesterday's Statistics File
where: yyyyyy = Operation that returned the error
= CREATE
= READ
= REQBUF
ee = Operation Error Code
(continued)
DPP Recovery and Routine Maintenance Guide BCS35 and up
Disk drive procedures 4-75
(continued)
(at the terminal)
(for each file that must be added)
= OPEN
= CLOSE
= DELETE
= WRITE
= SAVE
= DIRTRY