Numeric Keypad Mode: Sends numeric characters as if entered from a numeric keypad. Default = Off
Numeric Keypad Mode On
Automatic Direct Connect Mode: This selection can be used if you have an IBM AT style terminal and the system is dropping
characters. Default = Off
Automatic Direct Connect Mode
On
RS232 Modifiers
RS232 Baud Rate
Baud Rate sends the data from the scan engine to the terminal at the specified rate. The host terminal must be set for the
same baud rate as the scan engine. Default = 115200.
300
1200
2 - 16
* Turbo Mode Off
* Numeric Keypad Mode Off
* Automatic Direct Connect
Mode Off
600