Introduction - Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8 User Manual

INTRODUCTION

Thank you for purchasing the CC-Link IE Field Network waterproof remote IO-Link module (hereafter abbreviated as IO-Link
module).
This manual describes the procedures, system configuration, parameter settings, functions, and troubleshooting of the IO-
Link module.
Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the
functions and performance of the IO-Link module to handle the product correctly.
When applying the program examples provided in this manual to an actual system, ensure the applicability and confirm that it
will not cause system control problems.
Please make sure that the end users read this manual.
Relevant product
NZ2GF12A-60IOLH8
Unless otherwise specified, this manual describes the program examples in which the remote I/O signals and
remote registers are assigned for an IO-Link module as follows.
• Remote input signal: RX0 to RX4F
• Remote output signal: RY0 to RY4F
• Remote register: RWr0 to RWr83, RWw0 to RWw83
For the assignment of remote I/O signals and remote registers, refer to the following.
 User's manual for the master/local module used
7