Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8 User Manual page 143

• When "Without initial processing" is set
Initial processing request flag (RWr0.b8) does not turn on. The IO-Link module becomes operable (the update of external I/O
becomes enabled) without Initial processing completion flag (RWw0.b8) being turned on. When the module is powered on,
Remote READY (RWr0.b11) turns on.
Module parameter settings are read from the data storage.
*3
Module power supply
Initial processing request flag (RWr0.b8)
Initial processing completion flag (RWw0.b8)
Module setting
Remote READY (RWr0.b11)
Channel 1 (CQ) external input signal 0
*4
(RX0)
(1) Module parameters in the data storage
(2) Read module parameters in the data storage and start the operation.
*3 When data link starts at the same time of when the module is powered on
*4 When an external input device connected to X0 is on
Controlled by the IO-Link module
ON
OFF
OFF
OFF
(2)
ON
OFF
ON
OFF
(1)
Appendix 2 Remote Registers
A
APPX
141