Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8 User Manual page 112

2.
Click [OK] button on the following window to add a module label of the CPU module.
3.
Configure the CC-Link IE Field Network master/local module in the following way.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
4.
Click [OK] button on the following window to add a module label of the CC-Link IE Field Network master/local module.
5.
Configure "Required Settings" of "Module Parameter" in the following way.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Module Parameter]  [Required
Settings]
9 PROGRAMMING
110
9.3 Example of Program to Communicate with an IO-Link Device