Introduction - Mitsubishi Electric Trane TE-200A Installation Manual

2. Introduction

TE-200A/TE-50A is a centralized controller.
TW-50A is an LCD-less total management system.
Any connected air conditioning systems can be operated or monitored on the TE-200A/TE-50A's LCD or the Web
browser.
By using a PI controller that is built-in on the TE-200A/TE-50A/TW-50A, the energy-control-related status can be
displayed and Peak Cut control can be performed without a use of a PI controller (PAC-YG60MCA).
Each TE-200A/TE-50A can control up to a total of 50 indoor units and other equipment. By connecting TE-200A
(main controller) and TE-50A/TW-50A (expansion controllers), up to 200 indoor units and other equipment can be
controlled.
TE-50A is not designed to be used alone.
TE-200A/TE-50A/TW-50A and Mitsubishi Electric's AE-200A/AE-50A/EW-50A have the same functions.
"AE-200," "AE-50," or "EW-50" is displayed instead of "TE-200A," "TE-50A," or "TW-50A" on the TE-200A/TE-50A/
TW-50A's LCD or the Integrated Centralized Control Web.
Hereafter, TE-200A, unless otherwise specified, will be called "TE-200."
Hereafter, TE-50A, unless otherwise specified, will be called "TE-50."
Hereafter, TW-50A, unless otherwise specified, will be called "TW-50."
Note: Instead of TE-50A, LCD-less TW-50A can be used as an expansion controller.
WT09302X01
6