Energy Save; Printer Name; Restore Default - XYZ Printing Nobel Superfine User Manual

BUZZER
When the buzzer is turned on, the printer will output an audible signal when a button is pressed.
Buzzer is turned on by default. To switch off the buzzer:
Select "OFF" and press [OK] to change the setting.

ENERGY SAVE

LED backlight of the LCM enhances the readibility of the content of the display. To save energy consumed, the backlight will go off after the printer idles for
3 minutes (shown as 03M on the display) by default.
To set a longer time interval:
Backlight will never go off.
Backlight will go off after the printer idles 3 minutes.
Backlight will go off after the printer idles 6 minutes.
Select an option, and press [OK] to change the setting.
LANGUAGE
You may switch the display language on the printer. The default language is English. To switch to other language:
Select a language and press [OK] to change the setting.

PRINTER NAME

You can change the printer name on the WiFi network with below steps:
Press [OK] to change the printer name.
4 input modes are available:
[A] : Capital English letters mode
[a] : Lowercase English letters mode
[1] : Arabic numerals mode
[@] : Special symbols mode
Confirm the inputted printer name and press [OK] to finish.

RESTORE DEFAULT

All settings can be reset to factory default with a few clicks.
To reset all settings at once:
Simply select "YES" and press [OK] to reset.
This is the name of the printer. Only 16 characters are allowed
Change the printer name
Press [OK] to read the instruction on inputing the printer name with the printer
control panel
Up
●Home Key: Switch input mode
●Up and Down keys: Select numerals, alphabets, or symbols.
HOME
●Left and Right keys:Moves to the previous or next digit.
Left Right
Down
-7-