Motor Parameters - Delta C2000 Plus Series User Manual

05 Motor Parameters

The following are abbreviations for different types of motors:
 IM: Induction motor
 PM: Permanent magnet synchronous AC motor
 IPM: Interior permanent magnet synchronous AC motor
 SPM: Surface permanent magnet synchronous AC motor
 SynRM: Synchronous reluctance motor
Motor Parameter Auto-Tuning
05-00
Settings 0: No function

Refer to Section 12-2 "Adjustment and Application" for more details of motor adjustment
process.
Full-Load Current for Induction Motor 1 (A)
05-01
Settings Depending on the model power
 Set this value according to the rated current of the motor as indicated on the motor nameplate.
 The default is 90% of the drive's rated current.
Example: The rated current for a 7.5 HP (5.5 kW) is 25 A. The default is 22.5 A.
The setting range is between 40%–120% of the rated current.
(25 × 40% = 10 A and 25 × 120% = 30 A)
Rated Power for Induction Motor 1 (kW)
 05-02
Settings 0.00–655.35 kW
 Set the rated power for motor 1. The default is the drive's power value.
Rated Speed for Induction Motor 1 (rpm)
 05-03
Settings 0–xxxx rpm
 Set the rated speed for the motor as indicated on the motor nameplate.
1: Simple rolling auto-tuning for induction motor (IM)
2: Static auto-tuning for induction motor (IM)
4: Dynamic test for PM magnetic pole (with the running in forward direction)
5: Rolling auto-tuning for PM (IPM / SPM)
6: Advanced rolling auto-tuning for IM
11: Static auto-tuning for SynRM
12: FOC sensorless inertia estimation
13: Static auto-tuning for PM
12.1-05-1
Chapter 12 Descriptions of Parameter SettingsC2000 Plus
 You can set this parameter during operation.
Default: 0
Default: Depending on the
model power
Default: Depending on the
model power
Default: Depending on the
motor's number of poles