(From the previous page)
17.
The symbol is displayed!
18.
Enter the I/O number!
Converting the Program
Compile the input ladder blocks.
1.
Select [Convert] [Convert] on the menu bar.
2.
When the conversion processing completes and the input ladder blocks are compiled, the color of those ladder blocks
changes from gray to white.
Saving the Project
Save the created project.
[Project] [Save as]
19.
Press the
Enter key!
20.
The symbol is displayed!
17.
The added symbol (
18.
Move the cursor to the next position and enter
"Y1".
19.
Press the key.
20.
The added symbol (
21.
Creating a ladder program is completed.
28
X3
) is displayed.
) is displayed.
Y1