Cleaning The Exterior Of The Printer; Cleaning The Scanner Glass - Lexmark Pro910 Series Service Manual

Cleaning the exterior of the printer

CAUTION: SHOCK HAZARD
To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power
cord from the wall outlet and disconnect all cables to the printer before proceeding.
1.
Make sure that the printer is turned off and unplugged from the wall outlet.
2.
Remove all paper from the printer.
3.
Dampen a clean, lint-free cloth with water.
Warning: Do not use household cleaners or detergents, as they may damage the finish of the printer.
4.
Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the
exit bin.
Warning: Using a damp cloth to clean the interior may cause damage to printer.
5.
Make sure the printer is dry before beginning a new print job.

Cleaning the scanner glass

Clean the scanner glass and other related parts when vertical streaks appear on your printed pages or when you
see marks or smudges on such parts.
1.
Dampen a clean, lint-free cloth with water.
2.
Gently wipe clean the scanner glass and other related parts.
4
3
1 Backing material
2 Scanner glass
3 ADF scanner glass
4 ADF press plate
Lexmark Pro910 Series
1
2
Preventive maintenance
Previous
Next
Go Back
6-3