Sokkia 30R Series Operator's Manual page 113

3. After setting the data, press
{ }.
The coordinate data is recorded in
the current JOB and screen in step
2 is restored.
4. Continue to enter other known
point coordinate data.
5. After the registration of all the
coordinate data has been
completed, press {ESC} to restore
<Known data>.
PROCEDURE Entering known point coordinate data from an external instrument
1. Connect SET and host computer.
2. Select "Known data" in Memory
Mode.
• Current JOB name is displayed.
3. Select "Comms input" to display
<Comms input>.
Coordinate data starts to be
entered from an external
instrument and the number of
received items is displayed on the
screen. When data reception is
completed, <Known data> is
displayed.
• Press {ESC} to stop data
reception in progress.
22. REGISTERING/DELETING DATA
Known data
Job.JOB1
Key in coord
Comms input
Deletion
View
105