Sokkia 30R Series Operator's Manual page 111

• A JOB that has not been output to an auxiliary device (displayed with *) cannot
be deleted.
PROCEDURE
1. Select "JOB" in Memory Mode.
2. Select "JOB deletion."
<JOB deletion> is displayed.
• The numbers to the right
represent the number of data
items in each JOB.
3. Align the cursor with the desired
JOB and press {
4. Press [YES]. The data within the
JOB that is selected is deleted
and <JOB deletion> is restored.
21. SELECTING / DELETING A JOB
}.
JOB
JOB selection
JOB name edit
JOB deletion
Comms output
Comms setup
103