Sokkia 30R Series Operator's Manual page 56

12. COORDINATE MEASUREMENT
2. Select "Back sight", press [EDIT],
then input the backsight station
coordinates.
• When you wish to read in and set
coordinate data from memory,
press [READ].
"12.1 Entering Instrument
Station Data,PROCEDURE
Reading in Registered
Coordinate Data"
3. Press [OK].
Instrument station coordinates are
displayed.
4. Press [OK] again to set the
instrument coordinates.
5. Sight the backsight station, then
press [YES] to set the backsight
station.
<Coord> is restored.
• Press [NO] to go back to step 2.
48