Sokkia 30R Series Operator's Manual page 24

5. BASIC OPERATION
Inputting letters / figures
{F1} to {F4}: Input a letter or a figure allocated to the softkey
{FUNC} : Go to the next softkey page (search for the letter or figure you
want to input)
{FUNC} (hold for a moment): Go back one softkey page
{FUNC} (continue to hold): Go to previous softkey pages
{BS} : Delete a character on the left
{ESC} : Cancel the input data
{SFT} : Switch between upper and lower case
{ } : Select / accept input word / value
Example: Input of angle 125° 30' 00"(Input "125.3000")
1. Press [H.ANG] in page 2 of Meas mode.
2. Press { } to select "H angle."
3. Press [1]. "1" is input and the cursor moves to next input position.
4. Press [2].
5. Press {FUNC} to display the page in which [5] is allocated.
6. Press [5].
7. Press {FUNC} to display the page in which [.] is allocated.
8. Input the remaining figures. When
input is complete, press {
accept the value.
• When inputting alphabetic characters, press {FUNC} until the page in which
letters are allocated is displayed, and input using the same procedure used for
inputting figures.
Selecting options
{ } / { } : Up and down cursor
{ } / { } : Right and left cursor / Select other option
{ } : Accept the option
Example: Select a reflector type
1. Press [EDM] in page 2 of Meas mode.
2. Move to "Reflector" using { } / { }.
3. Display the option you want to
select using { } / { }.
Switches between "Sheet", "Prism"
and "None."
16
} to
Illum.hold: Laser