Sokkia 30R Series Operator's Manual page 51

3. In the second page of Meas mode
screen, press [MENU] , then
select "REM".
4. The REM measurement is started
and the height from the ground to
the object is displayed in "Ht.".
5. Press [STOP] to terminate the
measurement operation.
• To re-observe the target, sight
the target, then press [OBS].
6. Press {ESC} to finish
measurement and return to the
Meas mode screen.
• It is also possible to perform REM measurement when [REM] on the Meas
mode screen.
"24.2 Allocating Key Functions"
• Inputting target height (Step 3): Press [HT] to set target height. It can be set also
in "Stn data" of coordinate measurement.
"12.1 Entering Instrument Station Data"
11. DISTANCE MEASUREMENT
REM
Resection
Area calculation
Set-out line
Point projection
=
=
43