Sokkia 30R Series Operator's Manual page 28

5. BASIC OPERATION
Measuring screen
Input screen
* 1 Distance
Switching distance display status: "24.1 Changing Instrument Options
Settings in Config Mode"
S : Slope distance
H : Horizontal distance
V : Height difference
* 2 Vertical angle
Switching vertical angle display status: "24.1 Changing Instrument Options
Settings in Config Mode"
ZA : Zenith angle (Z=0)
VA : Vertical angle (H=0 / H=±90)
To switch vertical angle/slope in %, press [ZA/%]
* 3 Horizontal angle
Press [R/L] to switch the display status.
HAR: Horizontal angle right
HAL: Horizontal angle left
* 1,2,3
To switch usual "S, ZA, H" display to "S, H, V", press [
* 4 Remaining battery power (BDC46A, Temperature=25°C, EDM on)
: level 3 Full power.
: level 2 Plenty of power remains.
: level 1 Half or less power remains.
: level 0 Little power remains. Charge the battery.
20
F i n e
Laser is emited *8
1
2
Previous page
9
A Input mode *9
Next page
3 4
SHV].